Tytan Professional Can Foam Cleaner

A multi-use product designed for removing uncured polyurethane foams or adhesives. It is useful for cleaning of can valves and PU-foam gun applicators. The cleaner is excellent for degreasing metal surfaces before application of silicones and polyurethane. The Cleaner is manufactured in compliance with requirements of ISO 9001:2008 standard.

Gun & Spray Nozzle
Removes Uncured Foam
Clear in Color
12-oz Can
Sold Individually

Dissolving only uncured one-component PU-foams and adhesives. Cleaner has a destructive effect on the polystyrene, PVC and some other plastics, before use, test the cleaner on a given surface.

Tytan Graphite Pro Can Foam Gun Applicator

The Teflon coating provides an elegant understated black and grey color scheme and simplifies cleanup at the end of the day. The slim contoured handle makes it comfortable and ergonomic to use, and the premium textured pressure valve is simple to adjust to your ideal bead size, even with wet hands. Designed to work with all TYTAN polyurethane foams and adhesives. This means you can switch between products with ease, and you don’t have to worry about matching the correct applicator to each foam or adhesive.

Pro Gun Applicator
8" Barrel
Teflon-coated basket and barrel for easy cleanup and maintenance
Black in Color
For use with 24 oz can foam

Tytan Fire Block Can Foam

TYTAN Professional Fire Block Extreme Foam Sealant is a fire blocking foam sealant designed to work in the most extreme conditions, from -4°F to 100°F ambient temperatures. Though it is not approved as a fire stop, Fire Block Extreme is a certified dra3 blocking and fire blocking product. It is orange in color for easy inspection recognition. Fire Block Extreme uses a minimal shrinking technology to ensure an airtight seal while providing industry-leading yield. It offers minimal post-expansion for small gap filling while also being capable of filling gaps up to three inches. It offers premium adhesion to most construction materials including wood, metal, masonry, glass, vinyl, PVC, CPVC, plastics and more. With TYTAN Professional Fire Block Extreme Insulating Foam Sealant, you can Build with Confidence!

Type V Residential
24-oz Can
Requires Can Foam Gun
Orange in Color
Sold Individually

Standards & Approvals

UL classified
ICC-ES Report ESR-3302
ASTMC1620
ASTM E814 (modified)
NFPA 286
ASTM E84

Disclaimer: Must be stored in a temperature controlled environment

Tytan Fire Block Can Foam-12 per Case

Type V Residential
24-oz Can
Requires Can Foam Gun
Orange in Color

Standards & Approvals

UL classified
ICC-ES Report ESR-3302
ASTMC1620
ASTM E814 (modified)
NFPA 286
ASTM E84

Disclaimer: Must be stored in a temperature controlled environment

Tytan Window & Door Pro Insulation Foam Sealant Can Gun Foam, Qty: 1 Can

Low Pressure, Low Expansion Formula Expands to Fill Gaps Without Warping, Bending, or Bowing Window and Door Frames during Installation.

Flexible after cure – Absorbs Fenestration linear Expansion. High Yield product
Provides Excellent Dimensional Stability – Exceeds AAMA 812 Requirements
Bonds to and Seals Most Popular Construction Materials, including: Wood, Concrete, Plaster, Plumbing, etc
Controllable, Quick, and Efficient Application
Repels and Deflects Moisture
Durable Airtight Seal – Bonds, Stops Air Infiltration, and Heat Loss
High Thermal Insulation Value – Increases Energy Efficiency (R value 4- 5 per inch)
Easier to Transport and Use than Fiberglass
Shelf life 18 months
24-oz Can
Designed for Can Foam Gun
Off White
Sold by the Individual Can

Standards & Approvals

UL classified
AAMA 812
ASTM E84

Disclaimer: Must be stored in a temperature controlled environment

Tytan Window & Door Pro Insulation Foam Sealant Can Gun Foam

Low Pressure, Low Expansion Formula Expands to Fill Gaps Without Warping, Bending, or Bowing Window and Door Frames during Installation.
Flexible after cure – Absorbs Fenestration linear Expansion. High Yield product.
AAMA Verified Component for use in Window and Door installation.
Provides Excellent Dimensional Stability – Exceeds AAMA 812 Requirements.
Bonds to and Seals Most Popular Construction Materials, including: Wood, Concrete, Plaster, Plumbing, etc.
Controllable, Quick, and Efficient Application.
Repels and Deflects Moisture.
Durable Airtight Seal – Bonds, Stops Air Infiltration, and Heat Loss.
High Thermal Insulation Value – Increases Energy Efficiency (R value 4- 5 per inch).
Easier to Transport and Use than Fiberglass
Shelf life 18 months.
24-oz Can
12 Cans per Case
Requires Can Foam Gun
Off White in Color
Sold by the Case

Standards & Approvals

UL classified
AAMA 812
ASTM E84

Disclaimer: Must be stored in a temperature controlled environment

Dynasolve CU-6 1g

Dynasolve CU-6is a non-gelling, higher flash point version of CU-5, and is recommended for both flushing and cleaning, especially in applications in which liquid isocyanates are present either prior to cleaning, or will be introduced after cleaning (such as in a mixing tank).Dynasolve CU-6is non-chlorinated, nonflammable (by U.S. Department of Transportation definition), non-carcinogenic, and non-ozone depleting. It replaces and improves on the performance of commodity solvents such as methylene chloride, acetone, methyl ethyl ketone (MEK), and 1,1,1-trichloroethane.Dynasolve CU-6can be used for extended periods, tolerate high resin loadings, and will reduce disposal costs. It is also recyclable via vacuum distillation.

Directions for Use:

For Flushing: Use Dynasolve CU-6as you would normally use any other flushing solvent. Mild heating of the solvent will product faster results. The use of compressed air for agitation of the solvent will also help to facilitate cleaning. If excessive amounts of liquid isocyanates are present, Dynasolve Iso-Neutralizer must be used first. Failure to use the Iso-Neutralizer may lead to gelling of the flushing solvents.

For Cleaning: Immerse parts to be cleaned in Dynasolve CU-6. Let soak until residue is loosened and can be wiped or brushed off. Then rinse parts with water and dry. Mild heating of the solvent to 130-150° F, and/or the use of ultrasonics will produce faster results. Mechanical filtering of larger urethane particles using a cheesecloth or metal mesh filter will help extend the life of the solvent. For the most difficult applications, more aggressive (reactive) solvents are available.

Materials of Construction:

Recommend: Teflon, butyl rubber, silicon rubber, Kalrez, mild steel, Halar, melamine, Nylon 101, polyethylene, polypropylene, Ryton (150°F or less).

Avoid: Viton, PVC, ABS, Buna-N, Durel, Hypalon, Kynar, Lexan, Lucite, Neoprene, Noryl EN-265, Noryl 731, PET, phenolic, polyester, polysulfone, polyurethane, Ultem, Valox.

Cautions:

Dynasolve CU-6contains powerful organic solvents. It is harmful if inhaled or swallowed. Avoid breathing vapors or mist. Keep away from heat and flame. Avoid contact with eyes and skin. Wear gloves, safety glasses, and protective clothing when handling. Use with adequate ventilation.

Dynasolve CU-6 is especially effective for flushing mixing and metering equipment and feed lines, as it quickly and completely cleans polyols, crystallized isocyanates, and other urethane intermediates. However, in cleaning of isocyanate sides of equipment, Dynasolve Iso-Neutralizer should be used first if excessive onlyamounts of liquid isocyanates are present. Dynasolve CU-6 will not gel in contact with liquid isocyanates, but if limited amounts are present.
Dynasolve CU-6 is very effective in penetrating, loosening, and removing cured urethane foam deposits andbuild-up from mixing heads, troughs, conveyor parts, side walls, rollers, foam cutting devices and molds.
Dynasolve CU-6 will remove all types of urethanes: flexible, rigid, elastomers, molded, and adhesives. It iseffective for both MDI and TDI esters and ethers.
Dynasolve CU-6 will quickly and completely clean residual cured polyurethane reactive hot melt (PURHM)urethane adhesives from roll coating equipment. It will also remove these same reactive hot melts fromdispensing equipment.
Dynasolve CU-6 is excellent for the removal of polymer-based inks from rollers in flexographic printingequipment.
When heated, Dynasolve CU-6 will also clean many types of epoxies and other adhesives.