a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:608:"<p>PolyPrep is a solvent based product designed to interact with existing coatings such as polyurea, plastics, or synthetic rubber materials to accept a new application of polyurea. It is great when needind to tie-in or recoat existing polyureas after the recoat window has closed. This product can be brush or spray applied and will flash off and allow for recoat within an hour. Polyprep is a single component product that does not use aromatic halogenated or non-halogenated solvents to bond old polyurea to new polyurea.&nbsp;</p><p><p><ul><li>This is sold in a one gallon kit.</li></ul></p></p>";}}}}}}

a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:780:"<p>ConPrime is a two component, high solids, liquid applied primer with unique penetrating characteristics. It is designed to be used on porous substrates. ConPrime may be diluted to reduce viscosity and has a working time fo 45 minutes. ConPrime may be used with rapid curing polyurea sealants and spray coating systems and is designed for interior and exterior priming.&nbsp;</p><p><ul><li>This is sold in a 2 gallon kit.</li></ul></p><p>ConPrime should be coated within 12 hours after it has become tack free. Not UV stable. Surfaces must be dry, clean and free of foreign matter. Containers that have been opened must be used as soon as possible. ConPrime is difficult to clean up after it has cured. Mix no more material than can be used within 20 minutes.<br></p>";}}}}}}

a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:488:"<p>Handcote is a self-leveling, hand mix polyurea that is designed for small coating or patching applications. This material can be processed through non-heated plural component equipment if desired. It is ideal in applications where an elastomeric is desired and will accommodate substrate movement. This ambient curing material is great for low pressure spraying and can accommodate below freezing applications.&nbsp;</p><p><ul><li>This is sold in a two gallon kit.</li></ul></p>";}}}}}}

a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:771:"<p>ConPrime is a two component, high solids, liquid applied primer with unique penetrating characteristics. It is designed to be used on porous substrates. ConPrime may be diluted to reduce viscosity and has a working time fo 45 minutes. ConPrime may be used with rapid curing polyurea sealants and spray coating systems and is designed for interior and exterior priming. </p><p></p><ul><li>This is sold in a 10 gallon kit.</li></ul><p></p><p>ConPrime should be coated within 12 hours after it has become tack free. Not UV stable. Surfaces must be dry, clean and free of foreign matter. Containers that have been opened must be used as soon as possible. ConPrime is difficult to clean up after it has cured. Mix no more material than can be used within 20 minutes.</p>";}}}}}}

a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:235:"<p>Utilicote by AMP is a two component, 1:1, 100% solids, fast set, liquid applied, modified polyurea liner system for metal, concrete, fiberglass and wood surfaces.&nbsp;</p><p><ul><li>This is sold in a 100 gallon kit.</li></ul></p>";}}}}}}

a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:718:"ConCote is a rapid setting, 100% solids, flexible, aromatic two-component pure Polyurea. This odorless volatile-free elastomeric is specially designed to be applied to metal, Styrofoam (EPS), spray foam and tank lining membranes. ConCote gels in 10 seconds—it can be applied in single or multiple applications from 10 mils to 1,000 mils without the concern of sagging or running. ConCote offers a tack-free time of about 15 seconds and will not hydrolyze or contaminate other materials due to its inert nature. ConCote is moisture and temperature insensitive and will accommodate substrate movements while remaining strong.&nbsp;<div><br></div><div><ul><li>This is sold in a 100 gallon kit.</li></ul></div>";}}}}}}

a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:632:"<p>MetCote is a rapid setting, 100% solids, flexible, aromatic two-component pure Polyurea. This odorless volatilefree elastomeric is specially designed to be applied to metal, Styrofoam (EPS), spray foam and tank lining membranes. MetCote can be applied in single or multiple applications from 10 mils to 1,000 mils without the concern of sagging or running. MetCote will not hydrolyze or contaminate other materials due to its inert nature. MetCote is moisture and temperature insensitive and will accommodate substrate movements while remaining strong.&nbsp;</p><p><ul><li>This is sold in a 100 gallon kit.</li></ul></p>";}}}}}}

a:1:{s:4:"row1";a:2:{s:4:"type";s:4:"full";s:7:"columns";a:1:{s:4:"col1";a:2:{s:4:"grid";i:12;s:7:"widgets";a:1:{s:4:"wid1";a:4:{s:4:"type";s:4:"text";s:5:"label";s:0:"";s:7:"default";i:0;s:7:"content";s:561:"<p>AMP GeoCote is a rapid setting, 100% solids, flexible, aromatic two-component polyurea. This odorless volatile- free elastomeric is specially designed to be applied to various substrates including concrete, metal, geotextile and other lining membranes. GeoCote gels in 15 seconds—it can be applied in single or multiple applications without the concern of sagging. GeoCote offers a tack-free time of about 3 minutes and a low amount of stress shrinkage from curing, &lt;0.7%.&nbsp;</p><p><ul><li>This is sold in a 100 gallon kit.&nbsp;</li></ul></p>";}}}}}}