•  Exceptional Thermal Performance: Achieve superior energy efficiency with a thermal conductivity of 0.025 W/m.K (DIN 52612) and an impressive R-value of 5.66 per inch. This closed-cell foam minimizes heat transfer, keeping your indoors comfortable year-round.
•  Class A Fire Rated (ASTM E84): Engineered for enhanced safety, FastCoat boasts a Flame Spread of 5 and Smoke Development of 15, meeting stringent fire resistance standards.
•  Seamless, Monolithic Application: Provides a continuous, gap-free insulation layer that eliminates thermal bridges and dew points, ensuring optimal insulation performance. It can be applied easily to uneven and hard-to-reach surfaces where traditional materials are impractical.
•  High Yield & Cost-Effective: One can yields up to 20 board feet with a 1-inch thickness when applied correctly, offering excellent coverage and value.
•  Strong Adhesion: Bonds excellently to all common building materials without the need for mechanical fasteners.
•  Moisture & UV Resistance: The cured foam is moisture-resistant, helping to prevent mold growth. For outdoor applications, it is overpaintable and should be painted or coated to protect against UV discoloration.
•  Ozone-Friendly: Does not contain propellant gases harmful to the ozone layer.
•  Fast Curing: Features a skin time of 5±2 minutes and a cutting time of ≤40 minutes, with full cure achieved in 24 hours.
•  Acoustic Performance: Contributes to noise reduction with an acoustic insulation rating of 48.8 dB at 1600Hz (EN ISO 717-1). Helps foster a calmer, more comfortable environment for your home or business.

•  Buildings & Houses: Roofs, attics, facades, foundations, basements, floors, interior walls, inter-floor overlappings, interior partitions, ceilings, and cellars.
•  Structural Elements: Balconies, loggias, doors, window slopes, pipes, canals, and tank-like round surfaces.
•  Vehicles: Car bodies, car trailers, boats, yachts, vessels, and all types of sea vehicles.

1.  Surface Preparation: Ensure substrates are clean, dry, and free of contaminants. Lightly sprinkle the working surface with water (at temperatures above 32°F) to improve adhesion and shorten curing time.
2.  Product Preparation: Bring the can to room temperature (+68°F is optimal) by leaving it in a room for at least 24 hours or immersing it in cold/warm water. Shake the can well before use.
3.  Foam Application: Attach the appropriate nozzle (Nozzle A for vertical, Nozzle B for ceiling applications) and screw the can onto an applicator gun. Always hold the can upside down during application.
4.  Spray from 12-18 inches for vertical applications.
5.  Spray from 6-8 inches for horizontal (ceiling) applications.
6.  Apply in layers, with a recommended total thickness of 2 inches achieved in a minimum of 3 layers for ideal insulation value. Do not fill entire gaps as the foam will expand.
7.  Finishing& Cleaning: Secure fully hardened foam against UV rays using plaster or paints. Clean fresh foam with foam cleaner; cured foam must be removed mechanically.

Important Considerations