Related Products of GSP Surf X Flush: Go Green Wipes
GSP Surf A Lube: 1-Gallon Jug
- USED IN SPRAY EQUIPMENT FOR MID TO LONG TERM STORAGE UP TO 36 MONTHS
- USED IN TRANSFER PUMPS, HOSES, PROPORTIONERS & GUNS
- ALSO ACTS AS A PLASTICIZER, PREVENTING ISO (A) FROM FORMING CRYSTALS
- IDEAL FOR WINTERIZING RIGS & CAN WITHSTAND SEVERE COLD TEMPS WITHOUT FREEZING
- VOC EXEMPT, NON-FLAMABLE & NON-CORROSIVE
GSP Surf A Lube: 5-Gallon Pail
- USED IN SPRAY EQUIPMENT FOR MID TO LONG TERM STORAGE UP TO 36 MONTHS
- USED IN TRANSFER PUMPS, HOSES, PROPORTIONERS & GUNS
- ALSO ACTS AS A PLASTICIZER, PREVENTING ISO (A) FROM FORMING CRYSTALS
- IDEAL FOR WINTERIZING RIGS & CAN WITHSTAND SEVERE COLD TEMPS WITHOUT FREEZING
- VOC EXEMPT, NON-FLAMABLE & NON-CORROSIVE
GSP Surf X Flush: 1-Gallon Jug
- FLUSHING, LOW-PRESSURE SPRAY FOR LARGE AMOUNTS OF HARDENED ISO (A) & REMOVING OVERSPRAY FROM UNPAINTED SURFACES
- FLUSHING POLYOL (B) & ALL OTHER URETHANE INTERMEDIATES
- IMMERSION CLEANING FOR RESIN & POLYMERS MAX OF 140 °F
- MEDIUM DENSITY
GSP Surf X Flush: 5-Gallon Pail
- FLUSHING, LOW-PRESSURE SPRAY FOR LARGE AMOUNTS OF HARDENED ISO (A) & REMOVING OVERSPRAY FROM UNPAINTED SURFACES
- FLUSHING POLYOL (B) & ALL OTHER URETHANE INTERMEDIATES
- IMMERSION CLEANING FOR RESIN & POLYMERS MAX OF 140 °F
- MEDIUM DENSITY
GSP Surf X Flush: Go Green Wipes
- 90 PRE-MOISTENED 12" X 12" POLYPROPYLENE WIPES WITH THE POWER OF GSP USA'S SOLVENTS
- QUICK, EASY, SAFE & EFFECTIVE WAY TO REMOVE SINGLE COMPONENT ISO (PART A & B) RIGID & MOLDED POLYURETHANE FOAM
- MDI & TDI ESTERS & ETHERS, CURED REACTIVE HOT MELT, POLYURETHANE ADHESIVES & OTHER INDUSTRIAL SOILS
- MIXTURES OF FIBERGLASS & POLYESTER RESIN, VINYLESTER & EPOXY RESINS
- WIPE OFF HOSES, BUILDUP OF MIXING HEADS, GEAR PUMPS, TROUGHS, SIDE WALLS, CONVEYOR PARTS, ROLLERS, MOLDS, FOAM CURING DEVICES, HOLDING TANKS, FEEDING LINES & MIXING EQUIPMENT
- PERFECT FOR USE IN SMALLER & CONFINED SPACE WORK AREAS
Proper Procedure:
- Pull out one pre-moistened wipe from the bucket and close dispenser with attached cover securely.
- Apply wipe on surface using circular motions to cover the area with solvent.
- If needed, leave wipe on overnight or until surface is cleaned.
- Discard the wipe in accordance with all local, regional, national, provincial, territorial and international regulations. Waste characterizations and compliance with applicable laws are solely the responsibility of the waste generator.
Dynasolve CU-6 1g
Dynasolve CU-6 1g
Dynasolve CU-6is a non-gelling, higher flash point version of CU-5, and is recommended for both flushing and cleaning, especially in applications in which liquid isocyanates are present either prior to cleaning, or will be introduced after cleaning (such as in a mixing tank).Dynasolve CU-6is non-chlorinated, nonflammable (by U.S. Department of Transportation definition), non-carcinogenic, and non-ozone depleting. It replaces and improves on the performance of commodity solvents such as methylene chloride, acetone, methyl ethyl ketone (MEK), and 1,1,1-trichloroethane.Dynasolve CU-6can be used for extended periods, tolerate high resin loadings, and will reduce disposal costs. It is also recyclable via vacuum distillation.
Directions for Use
1. For Flushing: UseDynasolve CU-6as you would normally use any other flushing solvent. Mild heating of the solvent will product faster results. The use of compressed air for agitation of the solvent will also help to facilitate cleaning. If excessive amounts of liquid isocyanates are present, Dynasolve Iso-Neutralizer must be used first. Failure to use the Iso-Neutralizer may lead to gelling of the flushing solvents.
2. For Cleaning: Immerse parts to be cleaned inDynasolve CU-6. Let soak until residue is loosened and can be wiped or brushed off. Then rinse parts with water and dry. Mild heating of the solvent to 130-150° F, and/or the use of ultrasonics will produce faster results. Mechanical filtering of larger urethane particles using a cheesecloth or metal mesh filter will help extend the life of the solvent. For the most difficult applications, more aggressive (reactive) solvents are available. Please contact Dynaloy for more information on these products.
Materials of Construction
Materials of Construction
Recommend: Teflon, butyl rubber, silicon rubber, Kalrez, mild steel, Halar, melamine, Nylon 101, polyethylene, polypropylene, Ryton (150°F or less).
Avoid: Viton, PVC, ABS, Buna-N, Durel, Hypalon, Kynar, Lexan, Lucite, Neoprene, Noryl EN-265, Noryl 731, PET, phenolic, polyester, polysulfone, polyurethane, Ultem, Valox.
Cautions
Dynasolve CU-6contains powerful organic solvents. It is harmful if inhaled or swallowed. Avoid breathing vapors or mist. Keep away from heat and flame. Avoid contact with eyes and skin. Wear gloves, safety glasses, and protective clothing when handling. Use with adequate ventilation.
- Dynasolve CU-6 is especially effective for flushing mixing and metering equipment and feed lines, as it quickly and completely cleans polyols, crystallized isocyanates, and other urethane intermediates. However, in cleaning of isocyanate sides of equipment, Dynasolve Iso-Neutralizer should be used first if excessive onlyamounts of liquid isocyanates are present. Dynasolve CU-6 will not gel in contact with liquid isocyanates, but if limited amounts are present.
- Dynasolve CU-6 is very effective in penetrating, loosening, and removing cured urethane foam deposits andbuild-up from mixing heads, troughs, conveyor parts, side walls, rollers, foam cutting devices and molds.
- Dynasolve CU-6 will remove all types of urethanes: flexible, rigid, elastomers, molded, and adhesives. It iseffective for both MDI and TDI esters and ethers.
- Dynasolve CU-6 will quickly and completely clean residual cured polyurethane reactive hot melt (PURHM)urethane adhesives from roll coating equipment. It will also remove these same reactive hot melts fromdispensing equipment.
- Dynasolve CU-6 is excellent for the removal of polymer-based inks from rollers in flexographic printingequipment.
- When heated, Dynasolve CU-6 will also clean many types of epoxies and other adhesives.
TSL-Throat Seal Liquid/Pump Lube, 1 Gallon
TSL-Throat Seal Liquid/Pump Lube, 1 Gallon
Throat Seal Liquid (TSL) prevents paint and coatings from drying onto the displacement rod and packings, extending the life of the pump.
- Sold in 1 gallon Jug
Tytan Professional Can Foam Cleaner 00799
A multi-use product designed for removing uncured polyurethane foams or adhesives. It is useful for cleaning of can valves and PU-foam gun applicators. The cleaner is excellent for degreasing metal surfaces before application of silicones and polyurethane. The Cleaner is manufactured in compliance with requirements of ISO 9001:2008 standard.
- Gun & Spray Nozzle
- Removes Uncured Foam
- Clear in Color
- 12-oz Can
- Sold Individually
Dissolving only uncured one-component PU-foams and adhesives. Cleaner has a destructive effect on the polystyrene, PVC and some other plastics, before use, test the cleaner on a given surface.
Tytan Can Foam Metal Gun
Tytan Graphite Pro Gun
- Pro Gun Applicator
- 8" Barrel
- High Yield Teflon Coated Exterior
- Black in Color
- For use with 24 oz can foam
Tytan Fire Block Can Foam
TYTAN Fire Block Extreme PRO is a fire blocking foam sealant designed to work in the most extreme conditions, from -4°F to 100°F ambient temperatures. Though Fire Block Extreme is ideal for all high and low humidity applications, but Fire Block 113 is the recommended in desert climates. Though it is not approved as a fi re stop, Fire Block Extreme is a certified dra stopping and fire blocking product. It is orange in color for easy inspection recognition. Fire Block Extreme uses a minimal shrinking technology to ensure an airtight seal, while providing industry-leading yield and is safe to be used around windows and doors. It offers minimal post-expansion for small gap filling while also being capable of filling gaps up to three inches. It offers premium adhesion to most construction materials including: wood, metal, masonry, glass, vinyl, and some plastics. With TYTAN Fire Block Extreme PRO Insulating Foam Sealant, you can Build with Confidence!
- Type V Residential
- 24-oz Can
- Requires Can Foam Gun
- Orange in Color
- Sold Individually
Tytan Fire Block Can Foam-12 per Case
TYTAN Fire Block Extreme PRO is a fire blocking foam sealant designed to work in the
most extreme conditions, from -4°F to 100°F ambient temperatures. Though Fire Block
Extreme is ideal for all high and low humidity applications, but Fire Block 113 is the
recommended in desert climates. Though it is not approved as a fire stop, Fire Block
Extreme is a certified dra stopping and fire blocking product. It is orange in color for
easy inspection recognition. Fire Block Extreme uses a minimal shrinking technology to
ensure an airtight seal, while providing industry-leading yield and is safe to be used
around windows and doors. It offers minimal post-expansion for small gap filling while
also being capable of filling gaps up to three inches. It offers premium adhesion to most
construction materials including: wood, metal, masonry, glass, vinyl, and some plastics.
With TYTAN Fire Block Extreme PRO Insulating Foam Sealant, you can Build with
Confidence!
- Type V Residential
- 24-oz Can
- 12 Cans per Case
- Requires Can Foam Gun
- Orange in Color
- Sold by the Case
Tytan Window & Door Pro Gun Foam
Tytan Window & Door Pro Insulation Foam Sealant Can Gun Foam, Qty: 1 Can
Low Pressure, Low Expansion Formula Expands to Fill Gaps Without Warping, Bending, or Bowing Window and Door Frames during Installation.
- Flexible after cure – Absorbs Fenestration linear Expansion. High Yield product
- Provides Excellent Dimensional Stability – Exceeds AAMA 812 Requirements
- Bonds to and Seals Most Popular Construction Materials, including: Wood, Concrete, Plaster, Plumbing, etc
- Controllable, Quick, and Efficient Application
- Repels and Deflects Moisture
- Durable Airtight Seal – Bonds, Stops Air Infiltration, and Heat Loss
- High Thermal Insulation Value – Increases Energy Efficiency (R value 4- 5 per inch)
- Easier to Transport and Use than Fiberglass
- Shelf life 18 months
- 24-oz Can
- Designed for Can Foam Gun
- Off White
- Sold by the Individual Can
Tytan Window/Door Can Foam-12 per Case
Tytan Window & Door Pro Insulation Foam Sealant Can Gun Foam
- Low Pressure, Low Expansion Formula Expands to Fill Gaps Without Warping, Bending, or Bowing Window and Door Frames during Installation.
- Flexible after cure – Absorbs Fenestration linear Expansion. High Yield product.
- AAMA Verified Component for use in Window and Door installation.
- Provides Excellent Dimensional Stability – Exceeds AAMA 812 Requirements.
- Bonds to and Seals Most Popular Construction Materials, including: Wood, Concrete, Plaster, Plumbing, etc.
- Controllable, Quick, and Efficient Application.
- Repels and Deflects Moisture.
- Durable Airtight Seal – Bonds, Stops Air Infiltration, and Heat Loss.
- High Thermal Insulation Value – Increases Energy Efficiency (R value 4- 5 per inch).
- Easier to Transport and Use than Fiberglass
- Shelf life 18 months.
- 24-oz Can
- 12 Cans per Case
- Requires Can Foam Gun
- Off White in Color
- Sold by the Case
Cirr D Bond: 1-Gallon Jug
- ONLY IMMERSION CLEANING FOR BUILD UP OF HARDENED ISO(A) & INDUSTRIAL RESINS AT A MAX OF 140 °F
- SAFE ON ALL FERROUS & NON-FERROUS METALS
- DENSER & MORE AGGRESSIVE FORMULA
Cirr D Bond: 5-Gallon Pail
- ONLY IMMERSION CLEANING FOR BUILD UP OF HARDENED ISO(A) & INDUSTRIAL RESINS AT A MAX OF 140 °F
- SAFE ON ALL FERROUS & NON-FERROUS METALS
- DENSER & MORE AGGRESSIVE FORMULA
Stoner B-505 Polyoff Polyurethane Remover, 1 gallon can
Stoner B-505 Polyoff Polyurethane Remover, 1 gallon can
Extra powerful, time-saving formula cleans molds and tools with ease. Completely removes cured polyurethane, mold release, and other build-up from tooling, molds, and machinery. Use only on steel, aluminum and other metal tooling
Directions for Use
Recommended Procedure:
Wear rubber gloves and safety goggles to protect skin and eyes. Saturate the mold build-up with 8505 and allow to soak for about 8-10 hours. Soaking time may vary depending on the degree of build-up and temperature of mold. Allow 8505 to soak in until build-up easily wipes away with a rag or soft parts cleaning brush. Difficult areas may require a second application, 24hours of soaking, or scrubbing with soft cleaning brush or rag. Remove excess cleaner with a rag or allow to airdry. 8505 is a strong cleaner which may be harmful to certain plastics, paints, or other solvent sensitive materials. Always test for compatibility before using. Immediately after use, let 8505 evaporate from cloths or other applicators in a well-ventilated area, away from sources of ignition. Collect and dispose of material, rags, and applicators in metal containers in accordance with all local, state, and federal regulations.
Storage and Handling
8505 PolyOff™ Keep container tightly closed when not in use. Store in a cool, dry, well-ventilated area away from all sources of ignition. Avoid prolonged or repeated breathing of vapor. Avoid prolonged or repeated contact with skin. Use with adequate ventilation. Do not use near ignition sources. Consult SDS for additional safety information.